Cherokee 2WD L6-242 4.0L VIN M FI (1987)
FIGURE 2 - FRONT WHEEL BEARING ASSEMBLY
NOTE:
Some 1980 and 1981 model Eagles were equipped with ball bearing-type hubs which are not serviceable and must be replaced as an assembly
only. The non-serviceable bearings can be readily identified, upon removal, by the absence of the axle-to-bearing spacer (18), (Fig. 2).
Hub and Bearing Carrier Removal
HUB AND BEARING CARRIER REMOVAL - JEEP MODELS
1.
Raise the vehicle.
2.
Remove the wheel-tire assembly
3.
Remove the disc brake caliper but do not disconnect the brake hose. Secure the caliper to the chassis with wire or string.