Cherokee 2WD L6-242 4.0L VIN M FI (1987)
4.
Install tool BVi.FM.19 adjacent to the spacer tube (E) on the end of the output shaft.
5.
Turn screw (F) clockwise until it seats against the end of the output shaft.
6.
Turn nut (G) clockwise to force the 5th-speed gear and bearing assembly into the correct position.
7.
Remove tool B.Vi.FM.19 and the spacer tube (E).
8.
Install the clip ring (A).
FILING INSTRUCTIONS
Record this I.S. Note on page 11 of the B.V. BA 10/5 manual and file it in the manual.
