Cherokee 2WD L6-4.0L VIN S (1998)
Power Seat Adjuster And Motors Remove/Install
10. Remove the four nuts that secure the seat adjuster and motors assembly to the seat cushion frame and remove the adjuster and motors assembly
from the seat.
11. Reverse the removal procedures to install. Tighten the seat mounting hardware as follows:
-
Seat adjuster to seat cushion frame nuts - 25 N.m (18 ft. lbs.)
-
Seat adjuster to floor panel screws - 27 N.m (20 ft. lbs.)
-
Seat adjuster to floor panel nut - 40 N.m (30 ft. lbs.).