Cherokee 2WD L6-4.0L VIN S (1998)
Power Mirror Switch: Description and Operation
SYSTEM OPERATION
Both the right and left power outside mirrors are controlled by a single multi-function switch unit located on the driver side front door trim panel.
Two versions of this switch are offered. Models without power windows or power locks have a stand-alone switch mounted in the driver side front
door trim panel. Models equipped with power windows and power locks have a power mirror switch that is integral to the Driver Door Module
(DDM).
Both versions of the switch are operated in the same manner. A three position rocker-type mirror selector switch is moved right (right mirror
control), left (left mirror control), or center to turn the power mirrors off. Then one of four directional control buttons is depressed to control
movement of the selected mirror up, down, right, or left. The directional control buttons of the DDM-mounted switch are illuminated when the
ignition switch is in the On position. The stand-alone switch is not illuminated.
The stand-alone power mirror switch cannot be repaired and, if faulty or damaged, it must be replaced as a complete unit. The DDM power mirror
switch requires replacement of the entire DDM if the switch is faulty or damaged.
