Cherokee 2WD L6-4.0L VIN S (1998)
inch lbs.) torque.
15. Remove the cover alignment tool and install a replacement oil seal into the cover.
16. Install the vibration damper on the crankshaft.
17. Lubricate and tighten the damper bolt to 108 Nm (80 ft. lbs.) torque.
18. If equipped with air conditioning:
a) Install the A/C compressor serpentine drive belt idler pulley.
b) Install the generator.
c) Install the A/C condenser and receiver/drier assembly.
19. Install the serpentine drive belt on the pulleys and tighten.
20. Install the radiator. Connect the radiator hoses and automatic transmission fluid cooler pipes, if equipped. Fill the cooling system.
21. Install the fan and shroud.
22. Connect negative cable to battery.
