Cherokee 2WD L6-4.0L VIN S (1998)
Fig.44 Models With 4.0L Engine-With A/C-Except-RHD
Fig.45 Models With 4.0L Engine-With A/C-With RHD
Fig.46 Models With 4.0L Engine-Without A/C- With RHD
The belt routing schematics are published from the latest information available at the tingle of publication. If anything differs between these
schematics and the Belt Routing Label, use the schematics on Belt Routing Label. This label is located in the engine compartment.
BELT REPLACEMENT OR ADJUSTMENT- LEFT HAND DRIVE
Belt tension is adjusted at the power steering pump bracket and idler pulley assembly.
1. Disconnect negative battery cable from battery.
