Cherokee 2WD L6-4.0L VIN S (1998)
Engine Mount: Service and Repair
Rear Mount
A resilient rubber cushion supports the transmission at the rear between the transmission extension housing and the rear support crossmember or skid
plate.
REMOVAL
1. Disconnect negative cable from battery.
2. Raise the vehicle and support the transmission.
Fig.27 Rear Mount (Manual Transmission)
Fig.28 Rear Mount (Automatic Transmission)
3. Remove the nuts holding the support cushion to the crossmember. Remove the crossmember.
Manual Transmission
a. Remove the support cushion nuts and remove the cushion.
b. Remove the transmission support bracket bolts and remove the bracket from the transmission.
