Cherokee 2WD L6-4.0L VIN S (1998)
4. Refer to Runout Specifications chart.
5. If the propeller shaft run-out is out (if specification, remove the propeller shaft, index the shaft 180°, and re-install the propeller shaft. Measure
shaft runout again.
6. If the propeller shaft runout is now within specifications, mark the shaft and yokes for proper orientation.
7. If the propeller shaft runout is not within specifications, verify that the runout of the transmission/ transfer case and axle are within specifications.
Correct as necessary and re-measure propeller shaft runout.
8. Replace the propeller shaft if the runout still exceeds the limits.
