jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Heated Glass Element Switch|Description and Operation|Page 5832 > < Power Window Control Module|Description and Operation|Page 5827
Page 1
background image

Heated Glass Element Switch: Description and Operation

SYSTEM OPERATION

The rear window defogger switch is installed in the instrument panel accessory switch bezel, which is located near the bottom of the instrument
panel center bezel area, below the heater and air conditioner controls. The momentary-type switch provides a hard-wired ground signal to the
instrument cluster each time it is depressed. The instrument cluster rear window defogger timer and logic circuitry responds by energizing or
de-energizing the rear window defogger relay.

Energizing the rear window defogger relay provides electrical current to the rear window defogger grid and, if the vehicle is so equipped, the
outside rear view mirror heating grids. An amber indicator lamp in the defogger switch, which lights to indicate when the defogger system is
turned On, is also powered by the defogger relay output.

The defogger switch illumination lamp and indicator lamp bulbs are serviceable. The defogger switch cannot be repaired and, if faulty or
damaged, it must be replaced.

Heated Glass Element Switch|Description and Operation|Page 5832 > < Power Window Control Module|Description and Operation|Page 5827