Cherokee 4WD L6-242 4.0L VIN M FI (1988)
Installing Mirror Reinforcement
4. Install the mirror reinforcement in the door. Insert the reinforcement through the lower opening. Then rotate it in the direction shown until it is
upright.
5. Align the reinforcement with mounting bolt and rivet holes already drilled in the door. Then temporarily secure the reinforcement with one or two
bolts.
Installing Low Profile Mirror
6. From inside the door panel, center punch locations of the reinforcement bottom mounting bolts.
7. Remove the reinforcement and drill the bottom mounting bolt holes in the door.
8. Seal the door hem flange and prime the door, reinforcement and doorjams. Cover the bare edges of all drilled holes with an epoxy chromate, zinc
base primer or 3M 08892.
9. Coat the threads of all the mounting bolts with sealer prior to installation.
10. Reinstall the reinforcement in the door.
11. Align the reinforcement and install the bottom mounting bolts and the top and center rivets.
12. Apply anti-corrosion material to the door interior 3M 08892.
13. Assemble, refinish and install the door but do not install the trim panel at this time.
14. Place the mirror gaskets on the mirror bracket.