Cherokee 4WD L6-242 4.0L VIN S MFI (1992)
Seals and Gaskets: Service and Repair
Adapter Housing Oil Seal Replacement
REMOVAL
1. Hoist and support vehicle.
2. Remove transfer case.
3. Using a suitable pry tool, or a slide hammer mounted screw, remove the adapter housing seal.
INSTALLATION
1. Clean seal bore of adapter housing of any residual sealer material from original seal.
2. Using a suitable seal installer, install new seal so that the seal is located 0 +/-0.2 mm (0 +/-0.008 inch) to the seal bore face of adapter housing.
3. Install transfer case.
4. Check and add fluid to transmission as necessary.
5. Lower vehicle.
