Cherokee 4WD L6-4.0L VIN S (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
REMOVAL
1. Remove reservoir cap and empty fluid into drain container.
Brake Fluid Reservoir Retaining Pins
2. Remove pins that retain reservoir to master cylinder. Use hammer and pin punch to remove pins.
3. Clamp cylinder body in vise with brass protective jaws.
Loosening Reservoir
4. Loosen reservoir from grommets with pry tool.
Brake Fluid Reservoir Removal
5. Remove reservoir by rocking it to one side and pulling free of grommets.
