Cherokee 4WD L6-4.0L VIN S (1998)
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer reference as needed.
A. Inspect Power Brake Booster Date Code
1.
Locate the power brake booster label as shown in Figure 1.
2.
If the brake booster build date code is 298 through 309, the brake booster must be replaced. Continue with Section B.
^
If the brake booster build date is NOT IN THE ABOVE RANGE, no further action is necessary.
B. Replace Power Brake Booster Assembly
1.
With the ignition key in the OFF position, disconnect the battery.
Note:
To enhance customer satisfaction, remember to record all radio settings before disconnecting the battery and to reset all electronic memory (cloc
2.
For Cherokee (XJ) vehicles, remove the air filter housing cover.
3.
For Wrangler (TJ) vehicles, remove the evaporative canister and bracket assembly and set it aside.
4.
For Grand Cherokee (ZJ) vehicles, disconnect the crankcase ventilation system hose from the air filter housing cover and set the hose aside.
