Cherokee 4WD L6-4.0L VIN S (1998)
Cruise Control Vacuum Reservoir: Service and Repair
REMOVAL
Vacuum Reservoir Location
The vacuum reservoir is located behind right front bumper end cap on vehicles equipped with LHD (Left Hand Drive). It is located behind left front
bumper end cap on vehicles equipped with RHD (Right Hand Drive).
1. Remove front bumper end cap.
Vacuum Reservoir Remove/Installation
2. Remove vacuum line at reservoir.
3. Remove 2 reservoir mounting screws.
4. Remove reservoir from bumper bar.
INSTALLATION
1. Position reservoir to bumper bar and install mounting screws. Tighten screws to 8 N.m (72 in. lbs.) torque.
2. Install vacuum line to reservoir
3. Install front bumper end cap. Refer to Cruise Control/Cruise Control Vacuum Reservoir for procedures.