Cherokee 4WD L6-4.0L VIN S (1998)
7. Install power steering pump.
8. Install the viscous fan and shroud together. Install the four fan to idler pulley nuts and tighten to 27 Nm (20 ft. lbs.).
CAUTION: When installing the accessory drive belt, the belt MUST be routed correctly. 1 not, the engine may overheat due to the water pump
rotating in the wrong direction.
9. Install and tighten viscous fan shroud bolts to 4 Nm (31 inch lbs.).
10. Install and tension the accessory drive belt.
11. Install the electric cooling fan/shroud assy.
12. Install and tighten electric fan shroud bolts to 4 Nm (31 inch lbs.). Connect fan connector.
13. Fill cooling system with coolant and check for leaks.
14. Connect battery negative cable.
15. Start and warm the engine. Check for leaks.
