Cherokee 4WD L6-4.0L VIN S (1998)
Fig.13 Compression Ring Installation
8. Using a ring installer, install the second compression ring with the dot facing up.
9. Using a ring installer, install the top compression ring.
Fig.14 Ring Gap Orientation
-
Position the gaps on the piston as shown.
-
Oil spacer - Gap on center line of piston skirt.
-
Oil rails - gap 180° apart on centerline of piston pin bore.
-
No. 2 Compression ring - Gap 180° from top oil rail gap.
-
No. 1 Compression ring - Gap 180° from No. 2 compression ring gap.