Cherokee 4WD L6-4.0L VIN S (1998)
Fuel Pump Pickup Filter: Service and Repair
Fig. 24 Fuel Pump Inlet Filter
The fuel pump inlet filter (strainer) is located on the bottom of fuel pump module (Fig. 24). The fuel pump module is located on top of fuel tank.
REMOVAL
1. Remove fuel tank. Refer to Fuel Tank/Service and Repair.
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair
2. Remove fuel pump module. Refer to Fuel Tank Unit/Service and Repair.
3. Remove filter by prying from bottom of module with 2 screwdrivers. Filter is snapped to module.
4. Clean bottom of pump module.
INSTALLATION
1. Snap new filter to bottom of module.
2. Install fuel pump module.
3. Install fuel tank.