Cherokee 4WD L6-4.0L VIN S (1998)
Intake Air Temperature Sensor: Service and Repair
INTAKE MANIFOLD AIR TEMPERATURE SENSOR
Fig 47 Intake Air Sensor Location-Typical
The intake manifold air temperature sensor is installed into the intake manifold plenum near the throttle body (Fig. 47).
REMOVAL
1. Disconnect the electrical connector from the sensor.
2. Remove the sensor from the intake manifold.
INSTALLATION
1. Install the sensor into the intake manifold. Tighten the sensor to 28 Nm (20 ft. lbs.).
2. Connect the electrical connector to the sensor.
