Cherokee 4WD L6-4.0L VIN S (1998)
Evaporative Emission Control Canister: Service and Repair
EVAP Canister Location
REMOVAL
1. Disconnect vacuum hoses/lines at EVAP canister. Note location of lines before removal.
2. Remove EVAP canister and mounting bracket assembly from body (3 nuts).
3. Remove canister from mounting bracket (2 nuts).
INSTALLATION
1. Position canister into canister mounting bracket. Align 2 canister dowel pins into rubber bushings.
2. Install 2 canister nuts and tighten to 5 Nm (45 in. lbs.) torque.
3. Position canister and bracket assembly to body.
4. Install 3 nuts and tighten to 43 Nm (32 ft. lbs.) torque.
5. Connect vacuum hoses/lines at EVAP canister.
