jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Fuel Rail > < Fuel Pump Relay|Locations|Page 2539
Page 1
background image

Fuel Pump Pickup Filter: Service and Repair

Fig. 24 Fuel Pump Inlet Filter

The fuel pump inlet filter (strainer) is located on the bottom of fuel pump module (Fig. 24). The fuel pump module is located on top of fuel tank.

REMOVAL

1. Remove fuel tank. Refer to Fuel Tank/Service and Repair.

See: Fuel Tank/Service and Repair

2. Remove fuel pump module. Refer to Fuel Tank Unit/Service and Repair.

3. Remove filter by prying from bottom of module with 2 screwdrivers. Filter is snapped to module.
4. Clean bottom of pump module.

INSTALLATION

1. Snap new filter to bottom of module.
2. Install fuel pump module.
3. Install fuel tank.

Fuel Rail > < Fuel Pump Relay|Locations|Page 2539