Cherokee 4WD L6-4.0L VIN S (1998)
Power Window Switch: Testing and Inspection
The diagnosis found here applies only to the rear door power window switches. For diagnosis of the front door switches, see Windows and
Glass/Windows/Power Window Control Module/Door Module. If the problem being diagnosed is an inoperative power window switch illumination
lamp, but the power window switch operates as designed, replace the faulty switch.
1. Disconnect and isolate the battery negative cable.
2. Remove the power window switch from the rear door trim panel as described.
Rear Door Power Window Switch Continuity
3. Check the power window switch continuity in each position as shown in the Rear Door Power Window Switch Continuity chart. If OK, see the
Windows and Glass/Windows/Power Window Motor diagnosis. If not OK, replace the faulty switch.
