jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Valve Body, A/T|Removal and Installation|Page 3227 > < AW-4 4-Speed|Page 3224
Page 1
background image

Valve Body: Service and Repair
Removal and Installation

REMOVAL 

1. Remove oil pan plug and drain transmission fluid.
2. Remove oil pan and oil screen. Clean pan and screen in solvent and dry them with compressed air.

Solenoid Wire Connectors

3. Disconnect solenoid wire connectors. Mark wires for assembly reference.

Removing Transmission Valve Body Oil Tubes

4. Remove valve body oil tubes. Carefully pry tubes out of valve body with screwdriver.

Valve Body, A/T|Removal and Installation|Page 3227 > < AW-4 4-Speed|Page 3224