jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Output Shaft, M/T|Service and Repair|Page 3536 > < Output Shaft, M/T|Service and Repair|Page 3534

Cherokee 4WD L6-4.0L VIN S (1998)

Page 4
background image

Remove 3 - 4 Synchronizer Snap Ring

12. Remove select fit snap-ring holding the 3-4 synchronizer onto the output shaft.

Remove 3 - 4 Synchronizer And Third Gear

13. Using Bearing Splitter P-334 or suitable press plates positioned under third gear, press the 3-4 synchronizer and third gear from output shaft.
14. Remove third gear needle roller bearing from output shaft or gear.

ASSEMBLY 

1. Lubricate transmission components with specified gear lubricant during assembly.

Output Shaft, M/T|Service and Repair|Page 3536 > < Output Shaft, M/T|Service and Repair|Page 3534