Cherokee 4WD L6-4.0L VIN S (1998)
(4) Remove the lower bolts attaching the regulator to the inner door panel (Fig. 66).
(5) Remove the nuts attaching the regulator motor to the inner door panel, if equipped.
(6) Loosen the upper bolt that attaches the regulator to the inner door panel.
(7) Disconnect the wire harness connector from the regulator drive motor, if equipped.
(8) Remove the regulator and drive motor, if equipped
INSTALLATION
(1) Position window regulator and, if equipped, drive motor within the door panels.
(2) Install the fasteners attaching the regulator to the door inner panel.
(3) Connect the regulator wire harness connector.
(4) Position the window glass at the regulator and install the retainer, bushing and bolt.
(5) Install the waterdam.
(6) Install the trim panel.
