Cherokee 4WD V6-173 2.8L VIN W 2-bbl (1985)
Figure 5
9.
Install overslam bumper and screw assembly (see Parts Required) using cone washer shims (Figure 5) according to chart below, which refers
to clearance measured in step 3.
MEASURED CLEARANCE
SHIMS REQUIRED
.48 mm (.019") or less
1
.5 mm (.020") to 2.5 mm (.098")
2
2.5 mm (.099") to 3.5 mm (.138")
3
10.
Install nut and washer assembly (see Parts Required) and tighten to 100 in.lbs. (11.3 N-m).
11.
When liftgate is closed, overslam bumpers should compress approximately 1.27 mm (.050").
12.
Reinstall interior trim panels.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 23-00-30-90
. . . . . . . . . . . . . .
1.1 Hrs.
FAILURE CODE: 67-Noisy Rattles (Loose)