Cherokee 4WD V6-173 2.8L VIN W 2-bbl (1985)
Location of Aluminum Pop-Rivets and Screws
5.
Position the reinforcing plate on the liftgate and install the retaining screws (B).
6.
Drill three 4 mm holes and install four 3.5 mm diameter by 11 mm aluminum pop-rivets at (C).
7.
Clean the excess adhesive from the edge of the plate.
PARTS INFORMATION
DESCRIPTION
QUANTITY
PART NUMBER
PLATE, Liftgate Latch
1
8955 015 398
SRT/TIC INFORMATION
OPERATION DESCRIPTION
NUMBER
TIME
TIC
CO. LIFTGATE LATCH PLATE - INSTALL
0506
0.6
5-243
FILING INSTRUCTIONS
Record this I.S. Note on page P-57 of M.R. 247 and file it in the manual.
