Cherokee 4WD V6-173 2.8L VIN W 2-bbl (1985)
14.
Remove the interlock cable bracket nut and remove the bracket from the stud (Figure 23).
15.
Disconnect the ignition interlock cable from the floor shifter bellcrank and shifter bracket (Figure 24).
16.
Pull the driver side carpeting back just enough to access the ignition interlock cable.
17.
Remove the interlock cable by pulling it under and through the carpet.
18.
Discard the steering column ignition interlock cable and bracket.
19.
Install the new interlock cable bracket on the new cable (Figure 25).
