Cherokee 4WD LHD L6-4.0L VIN S (2001)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. Remove the passenger side bumper end cap from the front bumper. Refer to Frames and Bumpers for the procedures.
Fig.33 Vacuum Reservoir Remove/Install
2. Unplug the vacuum supply line connector from the vacuum reservoir.
3. Remove the two screws that secure the vacuum reservoir to the front bumper.
4. Remove the vacuum reservoir from behind the front bumper.
INSTALLATION
1. Install the vacuum reservoir behind the front bumper.
2. Install the two screws that secure the vacuum reservoir to the front bumper.
3. Plug in the vacuum supply line connector to the vacuum reservoir.
4. Install the passenger side bumper end cap on the front bumper. Refer to Frames and Bumpers for the procedures.
