Cherokee 4WD LHD L6-40L VIN S (2001) - Parking Lamp Bulb Replacement
Parking Light Bulb: Service and Repair
REMOVAL
1. Remove the headlamp bezel from the grille opening panel.
2. Remove the screws that secure the park/turn signal lamp unit to the grille opening panel.
3. Remove the park/turn signal lamp unit from the grille opening panel.
Fig.30 Park/Turn Signal Lamp Bulb
4. Rotate the park/turn signal bulb socket counterclockwise and remove it from the lamp unit.
5. Pull the bulb out of the socket.
INSTALLATION
1. Insert the bulb into the park/turn signal lamp socket.
2. Insert the socket into the park/turn signal lamp and rotate the socket clockwise.
3. Position the park/turn signal lamp unit to the grille opening panel.
4. Install the screws that secure the park/turn signal lamp unit to the grille opening panel.
5. Reinstall the headlamp bezel onto the grille opening panel.