Cherokee 4WD LHD L6-4.0L VIN S (2001)
Wheel Speed Sensor: Service and Repair
Rear
REMOVAL
1. Raise and fold rear seat forward for access to rear sensor connectors.
2. Disconnect sensors at rear harness connectors.
3. Push sensor grommets and sensor wires through floorpan.
4. Raise vehicle.
5. Disconnect sensor wires at rear axle connectors.
6. Remove wheel and tire assembly.
7. Remove brake drum.
8. Remove clips securing sensor wires to brake lines, rear axle and, brake hose.
9. Unseat sensor wire support plate grommet.
