Cherokee 4WD LHD L6-4.0L VIN S (2001)
5. Install new seal with Seal Installer 7549 (Fig. 180).
6. Lubricate and install gears in pump body.
7. Assemble stator shaft and pump body. Tighten shaft-to-body bolts to 10 Nm (7 ft. lbs.) torque.
8. Install new O-ring on pump body and new seal rings on stator shaft.
9. Install pump in torque converter and check pump gear rotation (Fig. 181). Gears must rotate smoothly when turned clockwise and
counterclockwise.
10. Lubricate pump O-ring and seal rings with petroleum jelly.
