Cherokee 4WD LHD L6-4.0L VIN S (2001)
a. Mount oil pump on torque converter. Then mount clutch on oil pump (Fig. 190).
b. Install a suitable threaded bolt/rod into oil pump for use in mounting Miller Tool C-3339 dial indicator components securely.
c. Mount dial indicator on the bolt/rod and position the dial indicator squarely on the clutch piston.
d. Apply compressed air through clutch feed hole in oil pump and note piston stroke length. Stroke length should be 1.85 - 2.15 mm (0.0728 -
0.0846 inch).
4. Remove thrust bearing and race assembly from clutch drum (Fig. 191).
