Cherokee 4WD LHD L6-4.0L VIN S (2001)
6. Install new collapsible spacer on pinion shaft and install pinion into the housing (Fig. 62).
7. Install yoke with Installer W-162-B, Cup 8109 and Spanner Wrench 6958 (Fig. 63).
8. Install pinion washer and a new nut onto the pinion. Tighten the nut to 216 Nm (160 ft. lbs.).
CAUTION: Never loosen the pinion nut to decrease pinion bearing rotating torque and never exceed specified preload torque. If preload torque
is exceeded a new collapsible spacer must be installed.