jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sensors and Switches - Steering and Suspension > < Diagram Information and Instructions|Page 202
Page 1
background image

Neutral Safety Switch: Service and Repair

1981-87 MODELS

1.

Disconnect battery ground cable.

2.

Raise and support vehicle.

3.

Disconnect electrical connector from switch and remove switch from transmission. Allow transmission fluid to drain into a suitable container.

4.

Move selector lever to Park and Neutral positions. Check switch operating fingers for proper operation.

5.

Reverse procedure to install. Correct transmission fluid level as required.

Sensors and Switches - Steering and Suspension > < Diagram Information and Instructions|Page 202