CJ-7 L6-258 4.2L VIN C 2-bbl (1982)
Wiper Motor: Service and Repair
Fig. 7 Windshield wiper system. CJ, Scrambler & Wrangler
CJ, SCRAMBLER & WRANGLER
1. Disconnect battery ground cable.
2. Remove necessary top components from windshield frame.
3. Remove right and left windshield hold-down knobs, then fold windshield down.
4. On models without crash pad assembly, remove wiper motor cover.
5. Remove left access hold cover.
6. Disconnect drive link from left wiper pivot.
7. Disconnect wiper motor electrical connector.
8. Remove wiper motor retaining bolts, then the wiper motor.
9. Reverse procedure to install.