Comanche 2WD L4-150 2.5L VIN E TBI (1989)
2.
Lubricate the replacement upper "O" ring with light oil, and install it into the housing bore. Install the centering ring on top of the upper "O" ring.
3.
Position the locating tab on the bottom of the injector with the slot in the bottom of the housing an install the injector. Install the injector retainer
and tighten the mounting screws securely.
4.
Reconnect the injector wire, and install the lower and upper air inlet bonnets.
5.
Reconnect the negative battery terminal.
