Comanche 2WD L4-150 2.5L VIN H TBI (1988)
Fuel Return Line: Service and Repair
Quick-Connect Fitting Service
NOTE: Fuel injection quick connect fitting "O" rings, spacers, and retainers must be replaced each time a quick connect fitting is disconnected.
Fuel Line Quick Connect Fitting
Fuel Line Quick Connect Fittings
REMOVAL/INSTALLATION
1.
Disconnect the quick connect fitting, by squeezing the two tabs against the fuel tube, and pulling the tube and hose apart.
2.
The quick connect retainer will stay in the connector, and must be removed prior to replacement. A bent paper clip or otherwise suitable tool will
remove the old connector.