Comanche 2WD L4-150 2.5L VIN H TBI (1988)
Figure 4
7.
Pull the water dam sheet away from the lower front corner of the door far enough to access the glass channel bottom screw (Fig. 4) and remove the
screw.
8.
Remove the inner and outer belt line door glass moldings.
9.
Pull the front of the upper glass run down from the window frame far enough to allow the vent window assembly to be pulled back for removal.
Figure 5
10.
Remove the window frame screws (Fig. 5.)
11.
Place masking tape along the exterior belt rail molding to prevent damage to the molding when removing the vent window assembly. Tilt the vent
window assembly and glass channel rearward and remove it from the door.
12.
Reverse steps 1-10 for installation and repeat this procedure on the other door.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 23-30-45-90
0.8 Hrs.
FAILURE CODE: 4X - Water leak
Technical Service Bulletin # 235890
Date: 900626
Vent Window - Water Leaks
Models
1984-90 XJ Bodies
1986-90 MJ Bodies
