Comanche 2WD L6-242 4.0L VIN S MFI (1992)
Trunk/Liftgate Sensor/Switch (For Alarm): Service and Repair
SECURITY SYSTEM LIFTGATE DISARM SWITCH OR PAWL MAGNET
1. Remove two screws at the top outside edges of the liftgate trim panel.
Liftgate Trim Panel Removal
2. Remove the trim panel with a wide flat blade tool. To aid in removal of the trim panel, start at the bottom of the panel.
Liftgate Disarm Switch
3. Remove the disarm switch electrical connector from the liftgate and disconnect.
4. Remove the spring steel U-shaped clip holding the lock cylinder in place.
5. Remove the lock cylinder and switch from the liftgate.
Disarm Switch Servicing
6. Slide the disarm switch out of the lock cylinder.