jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

PCM - Upshift Indicator Lamp ON in 5TH Gear|Page 2553 > < Shudder After Lockup Engagement|Page 2546
Page 1
background image

Shift Indicator: Technical Service Bulletins
PCM - Upshift Indicator Lamp ON in 5TH Gear

NO.: 08-23-93

GROUP: Electrical

DATE: May 14, 1993

SUBJECT:
2.5L Upshift Light

MODELS:

1991-1992 (YJ) Wrangler

(XJ) Cherokee/Wagoneer 
(MJ) Comanche

DISCUSSION:

The upshift light on the vehicles listed above is controlled by the Powertrain Control Module (SBEC). If the upshift light comes on when the vehicle is
already in fifth gear, the Powertrain control module should be replaced (see illustration).

PARTS REQUIRED:

REPAIR PROCEDURE:

This bulletin involves the replacement of the Powertrain Control Module.

1.

Using the procedure outlined in the appropriate service manual, replace the Powertrain Control Module.

2.

Complete the required information on the Authorized Modification Label and affix the label to the vehicle near the VECI label.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

08-19-92-91

PCM - Upshift Indicator Lamp ON in 5TH Gear|Page 2553 > < Shudder After Lockup Engagement|Page 2546