Comanche 2WD V6-173 2.8L VIN W 2-bbl (1986)
Transmission Mount: All Technical Service Bulletins
Exhaust Pipe - Rattles Against Crossmember
MAY 1986
001 032
1986 COMANCHE MODELS WITH V-6 ENGINE
9E
ENGINES
Attention: Workshop, Parts Department
THIS I.S. NOTE HAS BEEN REVISED AS INDICATED BY THE REVISION BAR:
EXHAUST PIPE RATTLE
On some 1986 Comanche models equipped with V-6 engine, the transmission-to-crossmember cushion may sag slightly allowing the exhaust pipe to
contact the crossmember.
If diagnosis indicates the original cushion has sagged, install one of the following replacement cushions.
PROCEDURE
Replace the cushion as described in Chapter BEngines of MR 277. Refer to Rear Engine Mount Removal and Installation.
PARTS INFORMATION
DESCRIPTION
QUANTITY
PART NUMBER
CUSHION, TRANSMISSION-TO-
1
8952 000 139
CROSSMEMBER (With 4WD)
CUSHION, TRANSMISSION-TO-
1
8952 001 313
CROSSMEMBER (With 2WD)
SRT/TIC INFORMATION
OPERATION DESCRIPTION
NUMBER
TIME
TIC
CO. MOUNT, TRANSMISSION-
2051
0.6
2-191
1 R&R OR REPLACE 1
FILING INFORMATION
Record this I.S. Note on pages B-9 and B-46 of M.R.277 and file it in the manual.
