Comanche 4WD L4-150 2.5L VIN E TBI (1989)
Headliner: Service and Repair
The headliner is a molded, one-piece component and only has limited flexibility. Do not bend the headliner during removal and installation as it could be
damaged.
INTERIOR LAMP REMOVAL/INSTALLATION
1. Insert a thin-blade tool under the edge of the interior lamp assembly and pry outward to detach the retaining clips from the side trim panel.
2. Pull the lamp assembly outward for access to the wire connectors.
3. Disconnect the wire connectors and remove the lamp.
4. Hold the interior lamp assembly near the installation position in the side trim panel.
5. Connect the wire connectors.
HEADLINER REPLACEMENT
1. Remove the dome lamps and all other attached components.
2. Remove the side and rear trim moldings.
3. Disengage the headliner from the retaining clips.
4. Remove the headliner.
5. Position the new headliner on the roof panel and secure it with the retaining clips.
6. Install the side and rear trim moldings and the dome lamps and other removed components.
