Comanche 4WD L4-150 2.5L VIN E TBI (1989)
Trim Panel: Service and Repair
The trim panels and headliner are attached with either retaining brackets, push screws, or Phillips head screws and trim covers.
CAUTION: Do not bend or attempt to remove a trim panel until adjacent panels and attached components have been removed. The panels are molded
components and have limited flexibility.
Interior Trim Panels
KICK, PILLAR AND SILL TRIM PANELS
1. Remove the trim covers (if applicable).
2. Remove the panel attaching screws.
4. Remove the trim panel.
5. Place the trim panel at the installation position.
6. Install the panel attaching screws.
7. Install the trim covers (if applicable).
CAB REAR TRIM PANELS
1. Fold the seat forward for access. Remove the seat if necessary.
