Comanche 4WD L4-150 2.5L VIN E TBI (1989)
Valve Body: Service and Repair
AW-4 4-Speed
Solenoid Harness Adapter Seal
Fig. 6 Harness adapter
1.
Remove oil pan, screen, solenoids and bracket as described, refer to VALVE BODY SOLENOIDS.
2.
Remove bracket securing solenoid harness adapter to case, Fig. 6.
3.
Pull harness adapter and wires out of case, then remove and discard adapter O-ring.
4.
Reverse procedure to install. Lubricate new O-ring before installing on adapter.
Valve Body
REMOVAL
1.
Remove oil pan, screen and disconnect solenoid wire connectors, refer to VALVE BODY SOLENOIDS.
Fig. 7 Valve body oil tubes
2.
Remove valve body oil tubes, Fig. 7, by carefully prying with a screwdriver.
Fig. 8 Valve body bolt location