Front Wheel Bearing Replacement Procedures | Comanche 4WD L4-150 25L VIN H TBI (1986)
6.
Install disc brake rotor and caliper.
FIGURE 2 - FRONT WHEEL BEARING ASSEMBLY
7.
Install washer (4), axle nut (3) and tighten to 237 N-m (175 ft.lbs.) torque (Fig. 2).
8.
Install nut retainer (2) and cotter pin (1), (Fig. 2).
NOTE:
Do not loosen the nut to fit the retainer. Tighten the nut to the next available slot.
9.
Install wheel and tire assembly
