Comanche 4WD L4-150 2.5L VIN H TBI (1986)
9.
Seat injector (F) with a pushing-twisting motion making certain that the aligning pin
(L)
engages slot in throttle body (M) so that injector harness connector (B) can be connected to the injector.
10.
Install retainer clip (D) and screws (C).
11.
Connect injector wire harness (B).
12.
Check the injector assembly for proper sealing by viewing the injector through
throttle body with the key on. If improper sealing is observed, reinstall the injector. Return to Step 2 and continue the injector replacement procedure.
13.
Install the air cleaner assembly.
PARTS INFORMATION
