Comanche 4WD L4-150 2.5L VIN H TBI (1986)
Fuel Injector: Service and Repair
Fig. 15 Replacing fuel injector
1.
Remove air filter, then disconnect electrical connector from injector.
2.
Remove retainer clip attaching screws, then the retainer clip, Fig. 15.
3.
Using suitable pliers, gently grasp center collar of injector between electrical terminals and carefully remove injector with a twisting/lifting motion.
4.
Discard upper and lower O-rings. Note that backup ring is positioned over upper O-ring.
5.
Reverse procedure to install, using new lubricated O-rings. Ensure that injector nozzle is centered in lower housing bore.