Comanche 4WD L4-150 2.5L VIN H TBI (1986)
2.
Install collar bolt (L) through hole (U), finger tight.
NOTE:
Be sure hole (U) and bolt (L) are aligned to the "flat" machined area (V) on the steering column shaft (W).
3.
Position spacer plate (Y) and bolts (N) to frame. Apply a few drops of Loctite 271 (P/N 8129800) to the threads of bolts (N).
4.
Raise the steering gear into position. Tighten bolts (N) to 101 N-m (75 ft.lbs.) torque.
