Comanche 4WD L4-150 2.5L VIN H TBI (1986)
Shifter Transfer Case: Adjustments
Fig. 1 Transfer case range control linkage adjustment (Typical)
1. Position range control lever in 2WD (Model 207 & 242), 2H (Model 231) or High (Model 228 and 229).
2. Install a 1/8 inch spacer between gate and lever while holding lever in position.
3. Position range control lever as noted in step 1, then adjust link as shown, until a free pin fit is achieved at transfer case outer layer.
