Comanche 4WD L4-150 2.5L VIN P MFI (1991)
Brake Shoe: Testing and Inspection
INSPECT BRAKE LININGS FOR:
Excessive wear, physical damage, and oil, grease or brake fluid contamination.
-
If any of the above conditions exists, brake linings should be replaced.
NOTE: Do not attempt to replace only one set of brake shoes; they should be replaced as an axle set only to maintain equal braking forces.
INSPECT BRAKE SHOE WEBBING, HOLD-DOWN AND RETURN SPRINGS FOR:
Signs of overheating indicated by a slight blue color.
-
If any component exhibits signs of overheating, replace hold-down and return springs with new ones.
CAUTION: Overheated springs lose their pull and could cause brake linings to wear out prematurely.
INSPECT ALL SPRINGS FOR:
Sags, bends and external damage.
-
Replace as necessary.
INSPECT HOLD-DOWN RETAINERS AND PINS FOR:
Bends, rust and corrosion.
-
If any of the above conditions exist, replace retainers and pins.